Is your feed water is having have more suspended solids? Is your Prefilters are getting choked with mud and suspended particles quite often? Are you getting water from for high turbid stream, rivers and natural reservoirs? do you have any space constrains in your pump room to have a massive gravity settling tank?
We have The PROSPEX Lamella Clarifier a ready to fix cost effective low foot print solution for your problem all above problems.
The PROSPEX Lamella Clarifier is fitted with a plate pack to maximize the effective settling area of the unit and a conical sludge hopper in a small footprint. Lamella clarifiers are ideal for applications where the solid loading is variable and solid sizing is fine. Lamella Clarifiers are one of the best options for pre-treatment ahead of more sophisticated treatment technologies because of their ability to remove a significant solid loading.
The PROSPEX Water Lamella Clarifier can be integrated into a treatment process or as a stand-alone unit. Typical applications are for separation of grit or metal removal or any other application where the solids have a specific gravity >1.0.
|Parameter||Units||PROS LC15||PROS LC40||PROS LC60||PROS LC90||PROS LC120||PROS LC150|
|LC Flow Rate||m3/h||15||40||60||90||120||150|
|Settling Rate *||m3/h||7.5 - 15||20 - 40||30 - 60||45 - 90||60 - 120||75 - 150|
|Treated water turbidity *||NTU||1 - 3||1 - 3||1 - 3||1 - 3||1 - 3||1 - 3|
|Dimensions (Clarifier Only)||L x W x H (m)||2.2 x 1.7 x 1.7||3.5 x 1.7 x 4.0||3.5 x 2.4 x 4.8||4.1 x 2.1 x 5.2||5.4 x 3.0 x 5.4||5.8 x 3.0 x 6.5|
Suspended Particle Removal
Pressure Sand filter
PROSPEX Media Filter are the most efficient type of filtration of water heavily contaminated with algae, organic matter and other impurities found in open reservoirs, canals and recycled water systems. The filtration occurs when the water passes through the open spaces and between sand particles, trapping the solid particles. The PROSPEX Media Filters use a bed of sand approximately 25 to 40 centimetres deep to filter particles out of the water. The dirt particles are trapped in the open areas between the sand particles are removed during the backwash cycle. This dirt and backwash water is expelled out of the tank and into a disposal area. Sand filter are available is FRP, Carbon Steel, & Stainless Steel 304 grades.
|Model||DIA (Inch/mm)||Filter area in m2||Required backwash flow in m3/hr||Model Wise Water Flow m3/hr Rate At Different Head in meters|
|5 Meter Head||8 Meter Head||10 Meter Head||15 Meter Head||20 Meter Head||25 Meter Head||35 Meter Head|
|PROS605||12/300||0.07||2 to 5.6||0.36 m3/hr||0.6 m3/hr||0.7 m3/hr||1 m3/hr||1.4 m3/hr||1.8 m3/hr||2.5 m3/hr|
|PROS610||16/400||0.12||4 to 9.6||0.6 m3/hr||1 m3/hr||1.2 m3/hr||1.8 m3/hr||2.4 m3/hr||3 m3/hr||4.2 m3/hr|
|PROS620||20/500||0.2||8 to 16||1 m3/hr||1.6 m3/hr||2 m3/hr||3 m3/hr||4 m3/hr||5 m3/hr||7 m3/hr|
|PROS635||25/625||0.3||12 to 24||1.5 m3/hr||2.4 m3/hr||3 m3/hr||4.5 m3/hr||6 m3/hr||7.5 m3/hr||10.5 m3/hr|
|PROS640||30/750||0.44||17 to 35||2.3 m3/hr||3.5 m3/hr||4.5 m3/hr||2.2 m3/hr||8.8 m3/hr||11 m3/hr||15.4 m3/hr|
|PROS650||36/900||0.63||25 to 50||3.2 m3/hr||5 m3/hr||6.3 m3/hr||9.44 m3/hr||12.6 m3/hr||15.8 m3/hr||22 m3/hr|
|PROS660||48/1200||1.13||45 to 90||5.7 m3/hr||9 m3/hr||11.3 m3/hr||17 m3/hr||22.6 m3/hr||28.3 m3/hr||39.6 m3/hr|
Automatic Self-cleaning Disc Filter
Prospex Automatic in-line Self Cleaning equipment with disc filtering element with 2" valves or 3" valves, High Density Polyethylene / stainless steel manifolds. Easy to install, Maximum resistance and durability.
Automation availabl in 110 V, 220 V or 12 V, Also possible to backwash with compressed air, minimizing the water loss during backwash.
DISC FILTRATION. MAXIMUM SAFETY
Its Efficient design and high quality of materials used in manufacturing guarantee an extended life with high resistance. Optimizes the performance and minimizes the frequency of maintenance.
SELF-CLEANING FILTERING ELEMENT
Maximum saving of water with efficiency in backwashing. Large filtering area. PROSPEX offers discs from 5 to 400 micron.
Versatility and compatibility. The system permits a wide range of possibilities with a minimal number of components.
FACILITATES EASY TRANSPORTATION AND INSTALLATION
Equipment is pre-assembled.
No tools required for maintenance. Maximum resistance with movable parts not susceptible to wear due to continuous operation.
- Max flow rate: 20m3/hr, 30m3/hr up to 150 m3/hr
- Working pressure: 2 to 10 bar
- Pressure loss(bar): 0.08 to 0.8 bar
- Back wash pressure(bar): ≧ 2.8 bar
- Max working temperature (℃): 70℃
- Accuracy(um): 20um, 55um, 70um, 100um, 130um, 200um, 400um
- Material: reinforced nylon, PP
- Average Backwashing time: 10-20 seconds
- Average Backwash flow rate: 8.11 m3/hr × 1 for 20 m3/hr filter